REXROTH DKCXX,3-100-7

REXROTH DKCXX.3-100-7 Product Details

The REXROTH DKCXX.3-100-7 is an AC servo drive controller, part of the EcoDrive series from Bosch Rexroth (formerly Indramat). It is designed for high-performance motion control applications requiring precise and dynamic control of servo motors. This particular model has a rated current output of 100 Amps and is engineered for reliable and efficient operation.

Product Parameters

Here are some key technical parameters for the REXROTH DKCXX.3-100-7:

• Manufacturer: Bosch Rexroth / Indramat

• Series: DKC (likely EcoDrive03 based on similar models)

• Model Number: DKCXX.3-100-7 (The 'XX' might indicate a specific configuration or feature set within the series)

• Rated Current Output: 100 A

• DC Bus Nominal Voltage: Typically 700 V DC (operates within a DC bus voltage range of 600-800 V AC for compatible systems)

• Input Voltage: Compatible with 380-480 V AC, three-phase systems (with a tolerance of ±10% in some cases)

• Input Frequency: 50-60 Hz

• Interface: Often features an RS-485 interface for programming, parameterization, and diagnostics. May also include analog and other communication interfaces depending on the specific configuration.

• Firmware: Firmware is typically ordered separately and defines the functionality and control algorithms of the drive. The version is crucial for compatibility and specific application requirements.

• Protection Class: IP20 (designed for installation in a control cabinet with a higher IP rating, such as IP54, for enhanced protection in industrial environments).

• Operating Temperature: Typically 0 to +45 degrees Celsius.

• Maximum Altitude: Up to 1000 meters above sea level.

• Maximum Relative Humidity: Up to 95% (non-condensing).

• Soft-Start Resistor: May include an internal soft-start resistor (e.g., 24 ohms in some similar models) to reduce inrush current during start-up.

• Weight: Approximately 9.7 kg (can vary slightly).

• Dimensions: Varies depending on the specific model but is generally compact for cabinet mounting.

Note: Specific parameters can vary based on the exact configuration and version of the DKCXX.3-100-7. Always refer to the official product documentation for the most accurate specifications.

Product Advantages

The REXROTH DKCXX.3-100-7 offers several advantages for industrial automation applications:

• High Performance: Designed for demanding servo applications requiring precise and dynamic motion control.

• Reliability: Bosch Rexroth products are known for their robust design and reliable operation, minimizing downtime.

• Efficiency: Contributes to energy-efficient systems by providing optimized motor control.

• Versatility: Compatible with a range of Rexroth servo motors (e.g., MKD, MKE, MHD series) and feedback systems.

• Communication Capabilities: Features interfaces like RS-485 for easy integration with control systems and for diagnostics. Options for fieldbus interfaces like PROFIBUS-DP may also be available.

• Modular Design: The EcoDrive series often features a modular design, simplifying maintenance and allowing for flexible system configurations. Firmware can be external for easy updates and replacement.

• Cost-Effectiveness: The EcoDrive series is often positioned as a cost-effective yet high-performance solution for automation needs.

• Safety Features: Built-in protection mechanisms to ensure safe operation of the drive and connected equipment.

• Global Support: Benefit from Bosch Rexroth's worldwide service and support network.